You are here: PRODUCTS > Other products

RTJ Gaskets

The RTJ (Ring Type Joint) gaskets are metallic sealing rings, suitable for duties that require high pressure (up to 1500 bar) and temperature (up to 1000 º C). Ring joint gaskets are always used in combination with special flanges which ensure good, reliable sealing with the correct choice of materials and profiles.

The ring joint gaskets are supplied in the following standard profiles: oval, octagonal, etc...

Camprofile Gaskets

Camprofile gaskets consist of a metal core, generally made of stainless steel, with concentric grooves on either side. A sealing layer is usually applied on both sides and depending on the service duty the material for this layer can be graphite, PTFE, asbestos-free fibre or metal.

PTFE seals with perforated steel insertion

PTFE gasket with a steel insert which gives it greater strength.

(Click para ampliar)

Cylinder Head Gaskets

A head gasket is a gasket that sits between the engine block and the cylinder head in an internal combustion engine. Its purpose is to seal the cylinders to ensure maximum compression and avoid leakage of coolant or engine oil into the cylinders.

We can custom made head gaskets after an old gasket.

Manual Gasket Cutter Machine

Suitable for cutting gasket boards up to 130 mm in diameter in materials such as fibreboard and graphite.

  • The blade is made of steel F522 which is more resistant than the common F114, so the length of the blade is higher than the conventional
  • All steel parts are steel cast, giving this saw a great resistance
  • The roller against the blade made of bronze, while some machines use a plastic roller, so the life of this piece is larger

Packing Extractors

Useful for extracting the packing from the stuffing box. Allow the removal of seals and gaskets in tight spaces. Available in different sizes.